Module 1 · 14 min read · Free chapter
Fractions, decimals and simplification
A fraction is in simplest form when the numerator and denominator share no factor but 1. To compare a⁄b and c⁄d, cross-multiply. A fraction in lowest terms has a terminating decimal only when its denominator has no prime factor other than 2 and 5. BODMAS fixes the order: brackets, orders, division and multiplication, then addition and subtraction.
Start from zero: one roti, many shares
Two friends share one roti, so each gets half, which we write as ½. If four friends share it, each gets a quarter, ¼. The bottom number, the denominator, tells how many equal parts the whole was cut into, and the top number, the numerator, tells how many parts you take.
Now cut a roti into 4 parts and take 2 of them. You hold ²⁄₄ of the roti, and that is exactly the same amount as ½. So the same quantity can be written in many ways, as ½, ²⁄₄, ³⁄₆ and so on, and these are called equivalent fractions.
A decimal is just another way to write a fraction whose denominator is 10, 100 or 1,000. So ½ = ⁵⁄₁₀ = 0.5, and ¼ = ²⁵⁄₁₀₀ = 0.25. Money already teaches us this, since 25 paise is 0.25 of a rupee.
This chapter makes you fast and safe with fractions and decimals, because almost every aptitude question passes through them. Percentages, ratios, averages, data tables and probability are all fractions in disguise. So we start with the meaning, then the rules, and then the shortcuts.
Simplest form and comparing fractions
Simplest form. To simplify a fraction, divide the numerator and denominator by their HCF. For ⁴⁸⁄₇₂, the HCF of 48 and 72 is 24, so the fraction becomes ⅔. Nothing has changed in value, because you divided the top and bottom by the same number.
Comparing with a common denominator. Which is bigger, ⅗ or ⁴⁄₇? Write both over 35: ⅗ = ²¹⁄₃₅ and ⁴⁄₇ = ²⁰⁄₃₅. Now the parts are the same size, so 21 parts beat 20 parts, and ⅗ is bigger.
The cross-multiplication shortcut. For positive fractions a⁄b and c⁄d, compare a × d with b × c. For ⅗ and ⁴⁄₇, compare 3 × 7 = 21 with 5 × 4 = 20, and since 21 > 20, ⅗ is bigger. This is the same as the common-denominator method, because multiplying both fractions by b × d leaves exactly these two products.
Ordering many fractions quickly. Convert each to a rough decimal or percentage, and use cross-multiplication only for close pairs. For ⅝, ⁵⁄₉ and ⁷⁄₁₂, the decimals are about 0.625, 0.556 and 0.583. So the order from smallest to largest is ⁵⁄₉, ⁷⁄₁₂, ⅝.
Why it matters: questions on ordering fractions look easy, but they are full of close values. A sure method saves you from guessing between two options that differ only in the order of the last two fractions.
Adding, subtracting, multiplying and dividing fractions
Adding and subtracting. You can only add parts of the same size, so first bring the fractions to a common denominator, best the LCM of the denominators. For ⅚ + ¾, the LCM of 6 and 4 is 12, so ⅚ + ¾ = ¹⁰⁄₁₂ + ⁹⁄₁₂ = ¹⁹⁄₁₂. As a mixed number, this is 1⁷⁄₁₂.
Multiplying. Multiply the tops and multiply the bottoms, so ⅔ × ⅘ = ⁸⁄₁₅. Read "×" here as "of": ⅔ of ⅘ of a field is ⁸⁄₁₅ of the field. Cancel common factors before multiplying to keep the numbers small.
Dividing. To divide by a fraction, multiply by its reciprocal, the fraction turned upside down. So 3 ÷ ½ = 3 × 2 = 6. This makes sense, because six halves fit into 3 whole rotis.
Why the reciprocal works. Dividing asks "how many of these fit into that?" A fraction c⁄d fits d⁄c times into 1, so it fits (a⁄b) × (d⁄c) times into a⁄b. For example, ¾ ÷ ⅜ = ¾ × ⁸⁄₃ = 2, and indeed two pieces of ⅜ make ¾.
Why it matters: "of the remaining" problems on salaries, land and stock are just chains of these operations. If each step is clean, a five-step word problem becomes a short line of working.
Decimals: when they end and when they repeat
From fraction to decimal. Divide the numerator by the denominator: ⅜ = 3 ÷ 8 = 0.375, and ⅓ = 0.333... with the 3 repeating for ever. Some decimals stop, and some fall into a repeating block. Which kind you get depends only on the denominator.
The rule. Write the fraction in lowest terms. If the denominator has no prime factor other than 2 and 5, the decimal terminates; otherwise it recurs. The reason is that a terminating decimal is a fraction over 10, 100 or 1,000, and these are made only of 2s and 5s, so ⁷⁄₄₀ terminates (40 = 2³ × 5), but ⁷⁄₁₂ recurs (12 has the prime 3).
From a recurring decimal back to a fraction. Let x = 0.4545..., with the block 45 repeating. Then 100x = 45.4545..., and subtracting gives 99x = 45, so x = ⁴⁵⁄₉₉ = ⁵⁄₁₁. The rule is simple: the repeating block over as many 9s as it has digits.
When the repeat starts later. For 0.1666..., the 1 does not repeat but the 6 does. Write the digits up to the end of the first block minus the non-repeating part (16 − 1 = 15), over one 9 for each repeating digit followed by one 0 for each non-repeating digit (90). So 0.1666... = ¹⁵⁄₉₀ = ⅙.
Order of operations: why we need BODMAS
The problem. What is 2 + 3 × 4? If you add first you get 20, and if you multiply first you get 14. A number sentence must mean one thing to everyone, so mathematicians agreed on an order, and the agreed answer is 14.
The order. First solve Brackets, innermost first. Then do Of, which means multiplication written in words, as in "¼ of 48". Then do Division and Multiplication from left to right, and finally Addition and Subtraction from left to right.
Left to right matters. Division and multiplication have equal rank, so you work from the left. So 48 ÷ 4 × 3 = 12 × 3 = 36, not 48 ÷ 12 = 4. Addition and subtraction work the same way, so 20 − 5 + 3 = 18, not 12.
"Of" binds tighter than division. In 48 ÷ 4 of 3, the "of" is done first: 4 of 3 = 12, so the answer is 48 ÷ 12 = 4. Papers use exactly this contrast to trap students, so read "of" and "×" as different signals in a long expression.
A full example. Take 18 − [6 ÷ 2 × (5 − 2)] + ½ of 10. The innermost bracket gives 3, then 6 ÷ 2 × 3 = 9, and ½ of 10 = 5. So the value is 18 − 9 + 5 = 14.
Simplification shortcuts and approximation
Fractions you should know as percentages. Learn these pairs by heart: ½ = 50%, ⅓ = 33⅓%, ¼ = 25%, ⅕ = 20%, ⅙ = 16⅔%, ⅛ = 12½%, ¹⁄₁₀ = 10% and ¹⁄₁₂ = 8⅓%. They turn many percentage sums into fraction sums. For example, 37½% of 640 is ⅜ of 640, which is 240.
Multiplying by 25, 125, 5 and 99. To multiply by 25, multiply by 100 and divide by 4, so 36 × 25 = 3,600 ÷ 4 = 900. To multiply by 125, multiply by 1,000 and divide by 8, and to multiply by 5, multiply by 10 and halve. To multiply by 99, multiply by 100 and subtract the number once, so 47 × 99 = 4,700 − 47 = 4,653.
Approximation when options are far apart. Round each number to an easy value and calculate. For 4.98 × 19.9 ÷ 2.01, think 5 × 20 ÷ 2 = 50; the exact value is about 49.3. If the options are 5, 50, 500 and 5,000, you are done in five seconds.
When not to approximate. If two options are close, such as 49.3 and 50.1, rounding is not safe. Then compute exactly, or round in a way that keeps track of the direction of error. Rounding 4.98 up and 2.01 down both push the answer up, so the true value must be a little below 50.
Why it matters: the aptitude paper is a time test as much as a skill test. These shortcuts give you back minutes that you can spend on comprehension passages or harder puzzles.
Where and why this is asked
Why examiners test fractions. Public decisions are full of shares: a scheme gives one-third of seats to a group, a fund is split between Centre and state, a survey says three-fifths of households own a phone. An officer must combine and compare such shares without mistakes. The paper checks exactly this skill, at Class X level, under time pressure.
Where it shows up. Direct simplification questions are common in the state aptitude papers and in GS mental-ability sections. In the UPSC paper, fractions mostly sit inside other questions, such as percentages, ratios, data tables and probability. Either way, a slow fraction step slows down the whole question.
When it goes wrong. The commonest error is the "of the remaining" trap: taking ¼ of the whole when the question says ¼ of what is left. Another is ignoring the order of operations in a long expression. Both errors produce wrong answers that examiners deliberately place among the options.
The habit to build. Before you calculate, write in one line what each fraction is a fraction of. Then simplify early, keep numbers small, and check the final answer against a rough estimate.
Exam lens: five question types and how to beat each
These are practice questions written by us, in the styles the papers use. Real past questions from your exam appear in the PYQ panel of this module.
Type 1: ordering fractions. "Arrange ⅝, ⁵⁄₉ and ⁷⁄₁₂ in ascending order." Convert to rough decimals, 0.625, 0.556 and 0.583, and the order is ⁵⁄₉ < ⁷⁄₁₂ < ⅝. If two decimals are within 0.01, confirm with cross-multiplication.
Type 2: recurring decimals. "Express 0.2727... + 0.333... as a fraction." These are ²⁷⁄₉₉ = ³⁄₁₁ and ⅓, so the sum is ⁹⁄₃₃ + ¹¹⁄₃₃ = ²⁰⁄₃₃. Simplify each part first, because 99 and 9 cancel neatly.
Type 3: long expressions. "Find 25 − 5 × [12 ÷ 3 of 2 − 1]." Here 3 of 2 = 6, so 12 ÷ 6 = 2, and 2 − 1 = 1. So the value is 25 − 5 × 1 = 20.
Type 4: "of the remaining" word problems. "A man spends ⅓ of his salary on rent and ¼ of the rest on food, and he has ₹12,000 left. Find his salary." After rent, ⅔ is left, food takes ¼ of ⅔ = ⅙, so ⅔ − ⅙ = ½ remains. Since ½ of the salary is ₹12,000, the salary is ₹24,000.
Type 5: approximation. "Which is closest to 1,999 × 0.249 ÷ 4.98?" Round to 2,000 × ¼ ÷ 5 = 100. Choose the option near 100, and check that no other option lies close to it.
Time plan. Types 1, 3 and 5 should take under a minute each. Types 2 and 4 can take about a minute and a half, so write each step clearly to avoid redoing it.
Practice set: twelve solved problems
Try each problem first, then read the steps. The problems go from easy to hard.
1. Simplify ⁸⁴⁄₁₂₆.
The HCF of 84 and 126 is 42. So the fraction is ⅔.
2. Which is larger, ⁵⁄₈ or ⁷⁄₁₁?
Compare 5 × 11 = 55 with 8 × 7 = 56. Since 56 is larger, ⁷⁄₁₁ is the larger fraction.
3. Find ⅚ − ⅜.
The LCM of 6 and 8 is 24, so this is ²⁰⁄₂₄ − ⁹⁄₂₄. The answer is ¹¹⁄₂₄.
4. Find ⁹⁄₁₀ ÷ ³⁄₅.
Multiply by the reciprocal: ⁹⁄₁₀ × ⁵⁄₃ = ⁴⁵⁄₃₀. This simplifies to ³⁄₂, or 1½.
5. Does ¹⁷⁄₈₀ give a terminating decimal?
It is in lowest terms and 80 = 2⁴ × 5, with no other prime. So yes, and it equals 0.2125.
6. Write 0.636363... as a fraction.
The block 63 has two digits, so the value is ⁶³⁄₉₉. This simplifies to ⁷⁄₁₁.
7. Write 0.8333... as a fraction.
The digits up to the first repeat are 83, and the non-repeating part is 8, so the top is 83 − 8 = 75 and the bottom is 90. So the value is ⁷⁵⁄₉₀ = ⅚.
8. Find 60 ÷ 5 × 4 − 3 of 6.
Do "of" first, 3 of 6 = 18, then 60 ÷ 5 × 4 = 48 from left to right. So the value is 48 − 18 = 30.
9. Find 12½% of 1,856.
Since 12½% is ⅛, the answer is 1,856 ÷ 8. So it is 232.
10. Find 64 × 125 without long multiplication.
Multiply by 1,000 and divide by 8, so 64,000 ÷ 8. The answer is 8,000.
11. A man spends ⅓ of his salary on rent and ¼ of the rest on food. He has ₹12,000 left. What is his salary?
After rent ⅔ remains, and food takes ⅙ of the salary, so ½ is left. So the salary is ₹24,000.
12. A tank is ⅖ full. After 24 litres are added, it is ⅝ full. What is its capacity?
The added water fills ⅝ − ⅖ = ⁹⁄₄₀ of the tank. So the capacity is 24 ÷ ⁹⁄₄₀ = 24 × ⁴⁰⁄₉ = 106⅔ litres.
Quick revision
- Dividing the top and bottom of a fraction by their HCF gives its simplest form without changing its value.
- For positive fractions, a⁄b is bigger than c⁄d when a × d is bigger than b × c.
- Fractions are added over the LCM of their denominators, and dividing by a fraction means multiplying by its reciprocal.
- A fraction in lowest terms terminates only when its denominator is made of 2s and 5s alone, and otherwise it recurs.
- A pure recurring decimal equals its repeating block over as many 9s as the block has digits.
- The order of operations is brackets, then "of", then division and multiplication from the left, then addition and subtraction from the left.
- The pairs ½ = 50%, ⅓ = 33⅓%, ⅙ = 16⅔%, ⅛ = 12½% and ¹⁄₁₂ = 8⅓% save time in percentage questions.