BPSC AEDO · Module 45 · standard depth · 13 min
Mensuration: areas, surfaces and volumes
What BPSC AEDO asks from this chapter
Syllabus lines this chapter covers:
- Paper 3: General Aptitude · Reasoning: analogy, similarities and differences, space visualisation, problem solving, classification, number and non-verbal series, coding-decoding
BPSC AEDO questions from this module are being sorted into our bank.
Cut to standard depth for BPSC AEDO. 13 deeper paragraphs are in the full chapter.
Start from zero: counting squares and cubes
A room's floor is 4 m long and 3 m wide. Tile it with tiles 1 m on each side, and you need 3 rows of 4 tiles, which is 12 tiles. That is all "area" means: the number of unit squares that cover a surface, here 12 m².
Volume is the same idea one step up. A box 2 m long, 1.5 m wide and 1 m deep holds 2 × 1.5 × 1 = 3 cubes of 1 m on each side. Each such cube holds 1,000 litres of water, so the box holds 3,000 litres.
Every formula in this chapter is a smart way of counting squares or cubes without drawing them. Once you see that, the formulas stop being a list to cram and become reasons you can rebuild.
Why this topic exists. Land is bought by area, roads are paved by area, tanks and dams are planned by volume. Officers estimating material, compensation or water storage use these formulas every week.
Plane figures
Rectangle and square. A rectangle 12 m by 8 m has area 12 × 8 = 96 m² and perimeter 2 × (12 + 8) = 40 m. A square of side a has area a² and perimeter 4a. Area and perimeter are different things: a long thin plot can have a large perimeter and a small area.
Triangle. Draw a rectangle round a triangle with the same base and height, and the triangle fills exactly half of it. So a triangle's area is half of base × height, where the height is measured at right angles to the base. A triangle with base 10 cm and height 7 cm has area 35 cm².
Parallelogram and trapezium. Slice a triangle off one end of a parallelogram and move it to the other end, and you get a rectangle; so its area is base × height. A trapezium is two triangles sharing a height, so its area is half the sum of the parallel sides times the height. With parallel sides 10 and 16 and height 6, the area is (10 + 16) × 6 ÷ 2 = 78.
Three sides only. When only the sides are known, use half the perimeter s. For sides 13, 14 and 15, s = 21, and the area is √(21 × 8 × 7 × 6) = √7,056 = 84. For a right triangle, simply take half the product of the two shorter sides.
Why it matters. Plot areas, room areas and field shapes appear in every paper. Knowing why each formula works prevents the classic slip of using a slanting side as the height.
Circles
Circumference. The distance round a circle is always a little more than three times its width; that number is π, about 3.14 or 22 ÷ 7. So the circumference is 2πr. A circle of radius 14 cm has circumference 2 × 22 ÷ 7 × 14 = 88 cm.
Area. Cut a circle into many thin slices and lay them alternately up and down, and they form a near-rectangle with length πr (half the circumference) and height r. So the area is πr². A circle of radius 7 m has area 22 ÷ 7 × 49 = 154 m².
Parts of a circle. A semicircle has half the area, and its perimeter is the curved half πr plus the diameter 2r. A sector with angle θ at the centre takes the fraction θ ÷ 360 of the area, so a 90° sector of a radius-14 circle has area 616 ÷ 4 = 154.
Rings and wheels. The area of a ring between radii R and r is π(R² − r²). A wheel of radius 35 cm covers its circumference, 220 cm, in one turn, so it makes 1,100 ÷ 2.2 = 500 turns in 1.1 km.
Why it matters. Circular tanks, ponds, roundabouts and wheels appear constantly. The habit of choosing radii that pair with 22 ÷ 7 tells you the examiner expects you to use that value.
Solids: volumes and surfaces
Cuboid and cube. A cuboid 10 cm by 8 cm by 5 cm has volume 10 × 8 × 5 = 400 cm³. Its surface is six rectangles in three matching pairs, 2(lb + bh + hl) = 2(80 + 40 + 50) = 340 cm². A cube of edge 6 cm has surface 6 × 36 = 216 cm² and volume 216 cm³.
Cylinder. A cylinder is a stack of circles, so its volume is base area × height, πr²h. With radius 7 and height 10, the volume is 22 ÷ 7 × 49 × 10 = 1,540. Unroll its curved surface and you get a rectangle of length 2πr and height h, so the curved surface is 2πrh.
Cone. A cone with the same base and height as a cylinder holds exactly one-third as much, so its volume is one-third of πr²h. A cone of radius 7 and height 12 holds 22 ÷ 7 × 49 × 12 ÷ 3 = 616. Its slant height l comes from Pythagoras, l² = r² + h², and its curved surface is πrl.
Sphere. A ball of radius r has volume (4 ÷ 3)πr³ and surface 4πr². A sphere of radius 21 has surface 4 × 22 ÷ 7 × 441 = 5,544. A hemisphere has half the volume and, if solid, a surface of 3πr² (curved half plus the flat circle).
Why it matters. Tanks, pipes, grain heaps, domes and balls are all these solids. Volume questions often ask for litres, so remember that 1,000 cm³ is one litre and 1 m³ is 1,000 litres.
Scaling and recasting
Areas grow as squares. If every side of a square grows by 20%, each side becomes 1.2 times as long. The area becomes 1.2 × 1.2 = 1.44 times as large, an increase of 44%, not 40%. In general, scaling lengths by k multiplies area by k².
Volumes grow as cubes. Double every edge of a cube and its volume becomes 2³ = 8 times as large, while its surface becomes 4 times as large. This is why a big tank holds far more water per square metre of steel than a small one.
Melting and recasting. When a solid is melted and made into another shape, the volume does not change. A sphere of radius 6 has volume (4 ÷ 3)π × 216 = 288π. Recast as a cylinder of radius 4, it needs 16π × h = 288π, so the cylinder is 18 units tall.
Counting small pieces. How many small balls of radius 1 cm can be made from a ball of radius 3 cm? The volumes are in the ratio 27 : 1, so the answer is 27. Because the radius ratio is cubed, small-looking changes in size produce large changes in count.
Why it matters. Percentage-change and recasting questions test understanding, not memory. They are common because a candidate who adds percentages or forgets to cube falls straight into the wrong option.
Where and why this is asked
Why examiners test it. Mensuration links arithmetic to the physical world: land, buildings, water and materials. The union aptitude paper keeps its mathematics near Class X level, and areas and volumes of basic shapes sit squarely in that level.
Where it shows up. State papers and recruitment tests ask direct area, perimeter and volume questions, often with π as 22 ÷ 7. The union paper prefers practical forms, such as how many tiles cover a floor, how a percentage change in size affects area, or how much a tank holds.
When it goes wrong. The usual slips are using a slanting side as a height, mixing radius and diameter, adding percentages instead of multiplying factors, and mixing units such as metres and centimetres in one product.
The habit to build. Write the formula, put every quantity in one unit, and check whether the answer is sensible for the object. A water tank of a few litres or a room of thousands of square metres is a sign to look again.
Practice set: twelve solved problems
Try each problem first, then read the steps. Take π as 22 ÷ 7.
1. Find the area of a rectangle 12 m by 8 m.
12 × 8 = 96. The answer is 96 m².
2. Find the area of a triangle with base 10 cm and height 7 cm.
10 × 7 ÷ 2 = 35. The answer is 35 cm².
3. Find the area of a triangle with sides 13, 14 and 15.
s = 21, so √(21 × 8 × 7 × 6) = √7,056. The answer is 84.
4. Find the area of a circle of radius 7 m.
22 ÷ 7 × 49 = 154. The answer is 154 m².
5. Find the circumference of a circle of radius 14 cm.
2 × 22 ÷ 7 × 14 = 88. The answer is 88 cm.
6. A trapezium has parallel sides 10 and 16 and height 6. Find its area.
(10 + 16) × 6 ÷ 2 = 78. The answer is 78.
7. Find the volume of a cuboid 10 cm by 8 cm by 5 cm.
10 × 8 × 5 = 400. The answer is 400 cm³.
8. Find the total surface area of a cube of edge 6 cm.
6 × 6² = 216. The answer is 216 cm².
9. Find the volume of a cylinder of radius 7 and height 10.
22 ÷ 7 × 49 × 10 = 1,540. The answer is 1,540.
10. Find the volume of a cone of radius 7 and height 12.
22 ÷ 7 × 49 × 12 ÷ 3 = 616. The answer is 616.
11. Find the surface area of a sphere of radius 21.
4 × 22 ÷ 7 × 441 = 5,544. The answer is 5,544.
12. Each side of a square increases by 20%. By what percentage does its area increase?
1.2 × 1.2 = 1.44. The answer is 44%.
Quick revision
- Rectangle l × b; triangle half of base × height; parallelogram base × height; trapezium half the sum of parallel sides × height.
- Three sides known: √(s(s − a)(s − b)(s − c)), s half the perimeter.
- Circle: circumference 2πr, area πr²; sector θ ÷ 360 of the area.
- Cuboid lbh, surface 2(lb + bh + hl); cube a³, surface 6a².
- Cylinder πr²h, curved surface 2πrh; cone one-third of πr²h, curved surface πrl.
- Sphere (4 ÷ 3)πr³, surface 4πr².
- Lengths × k: areas × k², volumes × k³; recasting keeps volume.
- 1 m³ = 1,000 litres; 1 hectare = 10,000 m².