BPSC LDC · Module 43 · basic depth · 10 min
The RBI and monetary policy: repo rate, CRR, SLR and the MPC
What BPSC LDC asks from this chapter
Syllabus lines this chapter covers:
- Paper 2: General Knowledge (General Studies, General Science and Mathematics, Mental Ability) · Geography, economic affairs, Indian agriculture and natural resources, five-year plans
BPSC LDC questions from this module are being sorted into our bank.
Cut to basic depth for BPSC LDC. 20 deeper paragraphs are in the full chapter.
Start from zero: the town's water tank
Think of a town that gets its water from one big tank. If the tank lets out too much water, the streets flood. If it lets out too little, taps run dry and people suffer.
Money in an economy works in a similar way. Too much money chasing goods pushes prices up, which is inflation (see Inflation: meaning, causes and types). Too little money slows down business, buying and jobs.
India's money tank is managed by the Reserve Bank of India (RBI), the country's central bank. The RBI does not lend to you or me directly. It controls how much money flows to banks, and how costly that money is, and the banks then pass it on to homes and businesses.
The set of decisions the RBI takes to control the cost and amount of money is called monetary policy. This chapter explains its main tools, such as the repo rate, CRR and SLR, and who decides them, the Monetary Policy Committee (MPC).
The repo rate: the price of money for banks
Banks often need cash for a day or a few days, because deposits and withdrawals do not always match. One way they get it is by borrowing from the RBI.
Repo is short for "repurchase agreement". The bank gives the RBI government securities and takes cash. It agrees to buy the securities back the next day at a slightly higher price. That extra amount is the interest, and its rate is the repo rate.
According to the RBI, the repo rate is the fixed interest rate at which it provides overnight liquidity to banks against government and other approved securities, under the liquidity adjustment facility (LAF). It is the policy rate: the one rate that signals the RBI's view on money.
Why this one rate matters so much: when the RBI raises the repo rate, borrowing from it becomes costlier for banks. Banks then tend to raise their own lending rates, and the effect spreads across the economy. When the RBI cuts the repo rate, the opposite happens.
CRR, SLR and open market operations
The repo rate changes the price of money. Other tools change the amount of money banks can lend.
Cash reserve ratio (CRR). Every bank must keep a part of its deposits with the RBI as cash. RBI describes CRR as the average daily balance a bank keeps with it, as a share of its net demand and time liabilities (NDTL). The bank earns no interest on this money and cannot lend it. As on 16 November 2026, the CRR was 3.00%.
Statutory liquidity ratio (SLR). Banks must also keep a share of their liabilities in safe, liquid assets such as cash, gold and approved government securities. This protects depositors and keeps banks ready for sudden withdrawals. As on 16 November 2026, the SLR was 18.00%.
How they control money: a higher CRR or SLR leaves banks with less money to lend, which tightens money. A lower ratio frees more money for loans.
Open market operations (OMOs). These are outright purchases and sales of government securities by the RBI. When the RBI buys securities, it pays banks cash, so money in the system rises. When it sells, it takes cash out. OMOs are used for durable liquidity, that is, for longer periods than the overnight LAF.
How a policy change reaches your home
Suppose prices are rising fast and the RBI raises the repo rate. Here is how the effect travels, step by step. Economists call this transmission.
- Banks' cost rises. Borrowing from the RBI and from other banks becomes costlier.
- Loan rates rise. Banks raise rates on home, car and business loans. Over time, deposit rates also tend to rise.
- People borrow and spend less. A costlier EMI makes families delay buying a car or a house. Companies postpone some investment. Higher deposit rates make saving more attractive.
- Demand cools. With less spending, sellers find it harder to raise prices.
- Inflation eases. Slowly, price rise comes down towards the target.
The catch: time lags. This chain does not work overnight. It can take several months for the full effect to show, so the RBI must act on forecasts, not just today's numbers.
Why transmission can be weak: if banks are loaded with bad loans (see Bad loans and their cure: NPAs and the Insolvency and Bankruptcy Code), or if many loans are on fixed rates, a repo change may not pass through fully.
How the RBI fixed slow transmission (2019). For years, banks set loan rates using their own internal benchmarks, first the base rate and then the marginal cost of funds based lending rate (MCLR). The RBI found that these had not passed on its rate changes well. So from 1 October 2019, banks must link all new floating rate personal or retail loans, and loans to micro and small enterprises, to an external benchmark, such as the repo rate or a Treasury bill yield published by FBIL. Now, when the repo rate moves, the EMI on such a loan moves too, within a set time.
Who decides: the MPC and inflation targeting
The law. In 2016, Parliament amended the RBI Act to give India a formal inflation target and a Monetary Policy Committee (MPC). The MPC provisions came into force on 27 June 2016, and the first MPC was set up on 29 September 2016.
The MPC (Section 45ZB).
- It has six members. Three are from the RBI: the Governor (chairperson), the Deputy Governor in charge of monetary policy, and one officer nominated by the RBI's Central Board. The other three are appointed by the Central Government on the advice of a search-cum-selection committee.
- It meets at least four times a year, and the quorum is four members.
- Each member has one vote. If votes are tied, the Governor has a second or casting vote.
- The minutes are published on the 14th day after each meeting, and the RBI publishes a Monetary Policy Report once every six months.
The target. The Central Government sets the target in consultation with the RBI. On 25 March 2026, it retained the target at 4% CPI inflation, with a band of 2% to 6%, for 1 April 2026 to 31 March 2031. The first target, notified on 5 August 2016, was also 4% with the same band.
Accountability. If average CPI inflation stays above 6% or below 2% for any three consecutive quarters, the target is treated as missed. The RBI must then report to the government the reasons, the remedial actions and the estimated time to bring inflation back to target.
Quick revision
- The repo rate is the fixed rate at which the RBI lends overnight to banks against securities under the liquidity adjustment facility, and it is the policy rate.
- The corridor's floor, the SDF, is 25 bps below repo, its ceiling, the MSF, is 25 bps above repo, and the Bank Rate is kept equal to the MSF.
- The SDF needs no collateral, which is why it became the floor of the corridor in April 2022.
- CRR is a bank's average daily balance with the RBI as a share of its NDTL, and it earns no interest.
- SLR is the share of NDTL that a bank must hold in safe liquid assets such as cash, gold and approved securities.
- Through OMOs, the RBI buys or sells government securities outright to add or remove durable liquidity.
- Since 1 October 2019, new floating rate retail loans and loans to micro and small enterprises must be linked to an external benchmark such as the repo rate, because the MCLR had not passed on rate changes well.
- The MPC has six members, three from the RBI and three named by the government, and it meets at least four times a year.
- Its quorum is four, the Governor has a casting vote on a tie, and the minutes come out on the 14th day.
- The target is 4% CPI inflation with a band of 2–6%, and on 25 March 2026 it was retained for 1 April 2026 to 31 March 2031.
- If inflation stays outside the band for three consecutive quarters, the RBI must report the reasons, the remedies and the time needed.
- Most recently, the repo rate rose by 25 bps to 5.50% on 7 October 2026, with a stance of calibrated tightening.
Common confusions and exam traps:
- The repo rate is what banks pay the RBI; the SDF rate is what the RBI pays banks.
- CRR money stays with the RBI; SLR assets stay with the bank itself.
- The government sets the inflation target; the MPC sets the repo rate.
- Reverse repo is no longer the corridor floor; the SDF is.