RPSC Sub Inspector course‹› 0:00 studied

RPSC Sub Inspector · Module 70 · standard depth · 14 min

Basic statistics: mean, median, mode and range

What RPSC Sub Inspector asks from this chapter

Syllabus lines this chapter covers:

  • Paper II: General Knowledge and General Science · Reasoning and mental ability: statements, assumptions, arguments, conclusions and courses of action, analytical reasoning, series, odd one out, coding-decoding, relations, shapes.
  • Paper II: General Knowledge and General Science · Basic numeracy: number system, order of magnitude, ratio and proportion, percentage, simple and compound interest, data analysis.

RPSC Sub Inspector questions from this module are being sorted into our bank.

Cut to standard depth for RPSC Sub Inspector. 7 deeper paragraphs are in the full chapter.

Start from zero: one number for many

A block officer records rainfall for a week: 0, 4, 4, 6, 10, 12 and 34 mm. The collector asks one question on the phone: "How much did it rain, on a typical day?" Seven numbers are too many to read out, so the officer needs one number that speaks for all of them.

Seven days of rain

Statistics offers several such numbers, called measures of central tendency. The three common ones are the mean, the median and the mode. Each answers "typical" in a different way, and each can mislead when used in the wrong place.

Why we need more than one. For this week, the mean is 10 mm, the median is 6 mm and the mode is 4 mm. They differ because one very wet day, 34 mm, pulls some measures more than others. Knowing which number to report is as important as knowing how to calculate it.

What this chapter does. We learn each measure, the range that shows spread, and the shortcuts exams test. We also learn when each measure tells the truth and when it hides it.

The mean: share it out equally

The idea. The mean, often just called the average, is what each value would be if the total were shared equally. Add all the values and divide by how many there are. For the rainfall, 0 + 4 + 4 + 6 + 10 + 12 + 34 = 70, and 70 ÷ 7 = 10 mm.

The mean as a balance point
Day Rainfall (mm) Gap from mean
Monday 0 −10
Tuesday 4 −6
Wednesday 4 −6
Thursday 6 −4
Friday 10 0
Saturday 12 +2
Sunday 34 +24

The balance point. The gaps below the mean add to −26 and the gaps above add to +26. The mean is the point where the data balances, like a see-saw. This is why one large value far from the rest can drag the mean a long way.

The most useful form. Turn the formula around: sum = mean × count. If five numbers have a mean of 20, their sum is 100, whatever the numbers are. Most exam questions on averages become easy once you work with sums instead of means.

Why it matters. The mean uses every value, so it is the natural choice for totals such as budgets, output and rainfall. Per-head figures, such as income per person, are means too.

The median and the mode

The median. Sort the values and pick the one in the middle. The rainfall values are already sorted, and the 4th of 7 values is 6 mm. Half the days had less rain than this and half had more.

When the count is even. With an even number of values there are two middle values, and the median is their average. For 3, 5, 7, 8, 10, 12, 15 and 20, the middle pair is 8 and 10, so the median is 9. Always sort first, because the median of unsorted data is meaningless.

Finding the position. For n sorted values, the median sits at position (n + 1) ÷ 2. With 7 values that is the 4th, and with 8 values it is 4.5, which means halfway between the 4th and 5th. This rule saves time when the list is long and you only need to count to the middle.

The mode. The mode is the value that occurs most often. In the rainfall data, 4 mm occurs twice and every other value once, so the mode is 4 mm. A data set can have two modes, or none if every value occurs once.

Where each one fits. The mode suits things you count rather than measure, such as the most common shoe size or the most popular crop. The median suits data with a few extreme values, such as incomes or house prices. The mean suits data that is fairly even and where totals matter.

Mode for categories. The mode is the only one of the three that works for categories without numbers. A survey of crops grown in a block can have a mode, such as paddy, but it has no mean or median. This is why "most common" questions about crops, languages or occupations always ask for the mode.

Why it matters. Officers often report "the average" without saying which one. Knowing the three apart lets you see when a report has picked the measure that flatters it.

Range, shifts and combined means

The range. The range is the largest value minus the smallest. For the rainfall, it is 34 − 0 = 34 mm. A large range warns you that a single "typical" number hides a lot of variation.

Adding a constant. If every value goes up by 5, the mean, median and mode all go up by 5. The range does not change, because the largest and smallest both rise by the same amount. Think of the whole data set sliding along the number line.

Multiplying by a constant. If every value is doubled, the mean, median, mode and range all double. Converting units works this way, so a range of 10 °C becomes a range of 18 °F. Adding 32 in that conversion changes the averages but not the range.

Adding one more value. A new value equal to the mean leaves the mean unchanged. A new value above the mean raises it, and one below lowers it, by the gap divided by the new count. If a team of 9 averages 50 and a player scoring 70 joins, the new mean is 50 + 20 ÷ 10 = 52.

Combined mean. Section A has 30 students with a mean mark of 60 and section B has 20 students with a mean of 70. The combined mean is not (60 + 70) ÷ 2 = 65. Work with totals: (30 × 60 + 20 × 70) ÷ 50 = 3,200 ÷ 50 = 64, closer to A's mean because A is larger.

Why it matters. Merging data from districts, schools or years is routine work. Averaging the averages gives a wrong figure whenever the groups differ in size, and the error can change a ranking.

Which average tells the truth?

A salary example. Six people in an office earn 20, 22, 25, 28, 30 and 250 thousand rupees a month. The mean is 375 ÷ 6 = 62.5 thousand, but five of the six earn less than half of that. The median is (25 + 28) ÷ 2 = 26.5 thousand, which describes a typical person far better.

One rich household moves the mean

Skewed data. When a few values are much larger than the rest, the data is called skewed. Incomes, landholdings and city sizes are skewed, with a long tail of large values. In such data the mean lies above the median, and the median is the honest "typical" value.

A rough link. For data that is only moderately skewed, the three measures are roughly linked: mode ≈ 3 × median − 2 × mean. If the mean is 20 and the median 18, the mode is about 3 × 18 − 2 × 20 = 14. This is an approximation for smooth, single-peaked data, not an exact law.

Why it matters. "Average income rose" can be true even when most families earned less, if the richest earned much more. Surveys of household consumption therefore report medians and distributions, not only means. Reading which average is used is basic data literacy for an officer.

Where and why this is asked

Why examiners test it. Every government report quotes averages, from per-capita income to mean yield per hectare. An officer must calculate them correctly and judge whether they describe the typical case. The paper tests both the arithmetic and the judgement.

Where it shows up. Averages are among the most common arithmetic questions in state aptitude papers and in the UPSC aptitude paper. Median, mode and range appear in state papers and in data interpretation sets. Descriptive Mains papers in statistics ask for these measures from frequency tables, which the next chapter covers.

When it goes wrong. The usual slips are forgetting to sort before finding the median, averaging two group means without weights and thinking that adding a constant changes the range. Another is choosing the mean for income data, where one large value distorts it.

The habit to build. Turn every average into a sum before you start. For a median, sort first and count the values. For a claim about "the average", ask which average and whether the data is skewed.

Practice set: twelve solved problems

Try each problem first, then read the steps.

1. Find the mean of 4, 8, 9, 11 and 13.

The sum is 45 and there are 5 values. The mean is 45 ÷ 5 = 9.

2. Find the median of 7, 3, 9, 1, 5 and 11.

Sorted, the values are 1, 3, 5, 7, 9 and 11. The median is (5 + 7) ÷ 2 = 6.

3. Find the mode of 2, 3, 3, 5, 7, 7, 7 and 9.

The value 7 occurs three times, more than any other. The mode is 7.

4. Find the range of 18, 42, 27, 35 and 12.

The largest is 42 and the smallest 12. The range is 42 − 12 = 30.

5. The mean of six numbers is 15, and five of them are 10, 12, 14, 18 and 20. Find the sixth.

The total is 6 × 15 = 90 and the five add to 74. The sixth number is 90 − 74 = 16.

6. The mean of 20 observations is 40, but one value of 54 was recorded as 45. Find the correct mean.

The recorded total is 800, which is 9 too low. The correct mean is 809 ÷ 20 = 40.45.

7. Section A has 40 students with a mean of 55 and section B has 60 students with a mean of 65. Find the combined mean.

The totals are 2,200 and 3,900. The combined mean is 6,100 ÷ 100 = 61.

8. A data set has a mean of 30 and a range of 12, and 5 is added to every value. Find the new mean and range.

The mean shifts by 5 to 35. The range stays 12.

9. Every value in a data set is doubled, and the old median was 14. Find the new median.

Doubling every value doubles the middle value too. The new median is 28.

10. For a moderately skewed data set, the mean is 20 and the median 18. Estimate the mode.

Use mode ≈ 3 × median − 2 × mean = 54 − 40. The mode is about 14.

11. Salaries in thousand rupees are 20, 22, 25, 28, 30 and 250. Which average better shows a typical salary?

The mean is 62.5 thousand and the median 26.5 thousand. The median is better, because one high salary pulls the mean up.

12. In a village survey, 5 families have 2 members, 10 have 3, 15 have 4 and 10 have 5. Find the mean family size.

There are 40 families with 10 + 30 + 60 + 50 = 150 members. The mean is 150 ÷ 40 = 3.75.

Quick revision

One-page summary box
  • Mean = sum ÷ count, and sum = mean × count.
  • Median: sort first; for an even count, average the two middle values.
  • Mode: the most frequent value; there may be several or none.
  • Range = largest − smallest, a simple measure of spread.
  • Adding a constant shifts the averages but not the range; multiplying scales all of them.
  • Combined mean = total of all values ÷ total count, never the plain average of group means.
  • For skewed data such as incomes, the median is the honest typical value.

Check yourself

Exam-style questions on this chapter. Pick an answer to see the explanation. 0 of 28 answered

  1. Find the mean of 18, 8, 19, 24 and 21.

  2. Find the mean of 16, 21, 19, 17 and 22.

  3. Find the mean of 10, 14, 21, 9 and 21.

  4. Find the mean of 23, 18, 20, 28, 28 and 27.

  5. Find the median of 10, 21, 6, 15, 34, 22, 19 and 11.

  6. Find the median of 8, 6, 25, 15, 29, 38, 10 and 5.

  7. Find the median of 21, 16, 5, 18 and 37.

  8. Find the median of 16, 27, 23, 12, 8, 2 and 6.

  9. Find the median of 36, 11, 23, 10 and 1.

  10. Find the mode of 11, 2, 16, 10, 21, 16 and 16.

  11. Find the range of 11, 2, 16, 10, 21, 16 and 16.

  12. Find the mode of 7, 17, 17, 20, 17, 29 and 5.

  13. Find the range of 7, 17, 17, 20, 17, 29 and 5.

  14. Find the mode of 17, 17, 17, 2, 15, 28 and 26.

  15. Find the range of 17, 17, 17, 2, 15, 28 and 26.

  16. The mean of 5 numbers is 28, and 4 of them are 24, 24, 35 and 28. Find the last number.

  17. The mean of 6 numbers is 25, and 5 of them are 22, 23, 22, 20 and 33. Find the last number.

  18. The mean of 5 numbers is 33, and 4 of them are 25, 28, 38 and 37. Find the last number.

  19. The mean of 40 observations is 46, but a value of 68 was recorded as 86. Find the correct mean.

  20. The mean of 10 observations is 34, but a value of 36 was recorded as 63. Find the correct mean.

  21. Group A has 50 people with a mean of 48, and group B has 30 people with a mean of 59. Find the combined mean.

  22. Group A has 30 people with a mean of 48, and group B has 20 people with a mean of 67. Find the combined mean.

  23. A data set has mean 26 and range 12. If every value is multiplied by 8, what are the new mean and range?

  24. A data set has mean 26 and range 15. If every value is multiplied by 9, what are the new mean and range?

  25. A data set has mean 33 and range 9. If 6 is added to every value, what are the new mean and range?

  26. For a moderately skewed distribution, the mean is 37 and the median is 33. Estimate the mode.

  27. For a moderately skewed distribution, the mean is 35 and the median is 32. Estimate the mode.

  28. For a moderately skewed distribution, the mean is 59 and the median is 56. Estimate the mode.

Previous year questions

Previous year questions for UPSC CSE will appear here once each one is checked word for word against the official question paper.

Frequently asked questions

How do you find the median of an even number of values?

Average the two middle values after sorting.

What is the empirical relation between mean, median and mode?

Mode ≈ 3 median − 2 mean, for moderately skewed data.

Why is median income preferred to mean income?

A few very rich people raise the mean, while the median shows the typical person.

Can a data set have more than one mode?

Yes. It can be bimodal or multimodal, or have no mode at all.