UPPSC PCS · Module 48 · Mains depth · 18 min
Mixtures and alligation
What UPPSC PCS asks from this chapter
Syllabus lines this chapter covers:
- Prelims: General Studies II (CSAT) · General mental ability
- Prelims: General Studies II (CSAT) · Elementary mathematics up to class 10
UPPSC PCS questions from this module are being sorted into our bank.
Read at full depth: basics, the standard layer and the Mains analysis.
Start from zero: a tea stall's blend
A tea stall owner buys two kinds of tea leaves, one at ₹180 a kilogram and a better one at ₹240. He mixes 2 kg of the cheaper tea with 1 kg of the better tea. The 3 kg blend cost him 2 × 180 + 1 × 240 = ₹600, so it is worth ₹200 a kilogram.
Notice that ₹200 is not the simple average of 180 and 240, which is 210. There is more of the cheaper tea, so the blend's price leans towards ₹180. The price of a mixture is a weighted average, the same idea you met with combined averages.
Why mixtures matter. Farmers blend seed varieties, ration shops mix grain lots, pharmacists dilute medicines and engineers mix concrete in fixed proportions. In each case someone must know what the final price or strength will be, or how much of each part to use to hit a target.
This chapter teaches a quick method called alligation for the second question, "in what ratio should I mix?". It also covers adding water and repeated replacement, which appear often in exams.
The alligation rule
The question. Rice at ₹40 a kg is mixed with rice at ₹55 a kg to get a blend worth ₹45 a kg. In what ratio should they be mixed? Alligation answers this in one line.
The rule. Write the cheaper price c = 40, the dearer price d = 55 and the mean price m = 45. The ratio of cheaper to dearer is (d − m) : (m − c) = (55 − 45) : (45 − 40) = 10 : 5 = 2 : 1. So 2 kg of the cheaper rice go with every 1 kg of the dearer rice.
The cross picture. Many books draw this as a cross. Put c and d at the top corners and m in the centre, then subtract diagonally: d − m goes under c and m − c goes under d. Read the two numbers at the bottom as the ratio, cheaper to dearer.
A check that it makes sense. The mean ₹45 is nearer to ₹40 than to ₹55, so there must be more of the cheaper rice. The ratio 2 : 1 agrees. If your ratio ever gives more of the item whose price is farther from the mean, you have swapped the terms.
Why it matters. Alligation turns a weighted-average equation into simple subtraction. It is one of the fastest tools in the whole aptitude paper, and it works far beyond rice and tea.
Why alligation works: the balance
Gains and losses. In the mixture, every kilogram of cheap rice is "sold" at ₹45 instead of ₹40, a gain of m − c = ₹5. Every kilogram of dear rice is "sold" at ₹45 instead of ₹55, a loss of d − m = ₹10. For the blend to be fair, the total gain must equal the total loss.
The proof. With q₁ kg of cheap rice and q₂ kg of dear rice, balance means q₁ × (m − c) = q₂ × (d − m). Dividing gives q₁ : q₂ = (d − m) : (m − c), which is the alligation rule. So alligation is just the weighted-average formula solved for the ratio.
A balance beam. Picture a see-saw with the cheap rice at 40 and the dear rice at 55. It balances at 45, which is 5 from one end and 10 from the other. A see-saw balances when the heavier weight sits closer to the pivot, so the cheap side must be twice as heavy.
Going the other way. If you already know the quantities, use the weighted average directly. Mixing 20 kg at ₹30 with 30 kg at ₹40 gives (600 + 1,200) ÷ 50 = ₹36 a kg. Alligation and the weighted average are two directions on the same road.
Why it matters. Knowing the proof lets you apply alligation with confidence to new settings. It also shows when it fails: the mean must lie between the two values, or no mixture can reach it.
Adding water and changing strength
The fixed ingredient. A 40-litre can of milk contains 10% water, so it has 36 litres of milk. How much water must be added to make the water 20%? The milk does not change when water is added, and that is the key.
Solving it. After adding water, milk must be 80% of the new total. So 36 = 0.8 × total, which gives a total of 45 litres. The water to add is 45 − 40 = 5 litres.
Why focus on the fixed part. Both the total and the water change, so working with them leads to two unknowns. The milk is the one quantity that stays the same, so it carries the information from the old mixture to the new one.
Changing a ratio. A 50-litre mixture has milk and water in the ratio 3 : 2, so it has 30 litres of milk and 20 litres of water. To make the ratio 3 : 4, the water must become 40 litres while the milk stays 30. So 20 litres of water must be added.
Mixing two solutions. To raise 60 litres of 30% acid to 40% by adding 70% acid, use alligation on the strengths. The ratio of weak to strong is (70 − 40) : (40 − 30) = 3 : 1, so 60 litres of the weak solution need 20 litres of the strong one.
Why it matters. Dilution questions test whether you can spot the quantity that does not change. The same skill solves many reasoning and science questions.
Repeated replacement
The setting. A vessel holds 80 litres of pure milk. A milkman takes out 8 litres and replaces it with water, then repeats this once more. How much milk is left?
Step by step. The first draw removes 8 of 80 litres, which is ¹⁄₁₀ of everything, so 72 litres of milk remain. The second draw again removes ¹⁄₁₀ of the mixture, and so ¹⁄₁₀ of the milk in it. So the milk left is 72 × 0.9 = 64.8 litres.
The formula and why. Each draw keeps the fraction 1 − x ÷ V of whatever milk is there, because the liquid is well mixed. After n draws, the milk left is V × (1 − x ÷ V)ⁿ. Here it is 80 × 0.9² = 64.8, the same as before.
The link to compound decay. This is exactly the depreciation formula from the interest chapter, with the rate x ÷ V. Every draw takes the same share of what is left, not of what was there at the start. That is why the milk never reaches zero, however many times you repeat it.
Why it matters. Repeated-replacement questions look hard, but they are one-line compound calculations. Seeing the link with depreciation means one idea now solves three kinds of questions.
Alligation beyond mixtures
Any two-part average. Alligation works whenever a total is split into two parts, each with its own average, and the overall average is known. The "price" can be marks, speed, interest rate or profit percent. The "quantity" is whatever is being counted, such as students, hours or rupees.
Boys and girls. A class averages 50 marks, with boys averaging 52 and girls 47. Using alligation on the marks, boys : girls = (50 − 47) : (52 − 50) = 3 : 2. In a class of 40, that means 24 boys and 16 girls.
Two interest rates. ₹10,000 is lent partly at 6% and partly at 10%, and the total interest for a year is ₹840. The average rate is 8.4%, so the ratio at 6% to 10% is (10 − 8.4) : (8.4 − 6) = 1.6 : 2.4 = 2 : 3. So ₹4,000 is lent at 6% and ₹6,000 at 10%.
Water as a free ingredient. A milkman adds water, which costs nothing, to milk and sells the mixture at the cost price of milk, gaining 25%. Each litre he sells costs him only ¹⁰⁰⁄₁₂₅ of a litre of milk. So milk : water = 100 : 25 = 4 : 1.
Why it matters. Recognising a hidden two-part average saves a lot of algebra. It is the main reason alligation is worth learning so well.
Where and why this is asked
Why examiners test mixtures. Food safety, drug dilution, fertiliser blending, fuel blending and procurement of grain lots all involve mixtures. An officer checking whether milk is adulterated or whether a blend meets a standard needs exactly this arithmetic. Alligation also tests whether you can see the weighted average hidden in a story.
Where it shows up. State aptitude papers, mental-ability sections and recruitment papers ask direct mixture and replacement questions. The UPSC aptitude paper is more likely to hide alligation inside a question about two groups, two rates or two speeds. In both, the numbers are chosen so that alligation finishes the question quickly.
When it goes wrong. The commonest slips are swapping the alligation terms, using the simple average in place of the weighted one and forgetting that the non-water part stays fixed. In replacement questions, subtracting the same amount each time instead of the same share is another trap.
The habit to build. Name the cheaper value, the dearer value and the mean before you write the ratio. Check that the mean lies between them and that the larger share goes to the value closer to the mean.
Exam lens: five question types and how to beat each
These are practice questions written by us, in the styles the papers use. Real past questions from your exam appear in the PYQ panel of this module.
Type 1: the mixing ratio. "In what ratio must tea at ₹180 a kg be mixed with tea at ₹240 a kg so that selling the mixture at ₹264 a kg gives a 20% profit?" The mean cost is 264 ÷ 1.2 = ₹220, so the ratio is (240 − 220) : (220 − 180). The answer is 1 : 2.
Type 2: water at zero cost. "In what ratio should water be mixed with milk costing ₹60 a litre so that the mixture is worth ₹50 a litre?" Treat water as costing ₹0, so water : milk = (60 − 50) : (50 − 0). The answer is 1 : 5.
Type 3: repeated replacement. "From 80 litres of milk, 8 litres are drawn and replaced with water, twice. How much milk is left?" Use 80 × (1 − ⁸⁄₈₀)². The answer is 64.8 litres.
Type 4: two groups. "A class averages 50 marks; boys average 52 and girls 47. Find the ratio of boys to girls." Use alligation on the averages: (50 − 47) : (52 − 50). The answer is 3 : 2.
Type 5: two rates. "₹10,000 is lent partly at 6% and partly at 10%, earning ₹840 in a year. How much is lent at 10%?" The average rate is 8.4%, so the ratio is 2 : 3. The amount at 10% is ₹6,000.
Time plan. Types 2, 3 and 4 should take under a minute each. Types 1 and 5 can take about a minute and a half, so find the mean value first.
Practice set: twelve solved problems
Try each problem first, then read the steps. The problems go from easy to hard.
1. Rice at ₹40 a kg is mixed with rice at ₹55 a kg to get ₹45 a kg. Find the ratio.
Use (55 − 45) : (45 − 40) = 10 : 5. The ratio is 2 : 1.
2. 20 kg of rice at ₹30 a kg is mixed with 30 kg at ₹40 a kg. Find the price of the mixture.
The total cost is 600 + 1,200 = ₹1,800 for 50 kg. The price is ₹36 a kg.
3. A 40-litre can of milk has 10% water. How much water must be added to make the water 20%?
Milk stays 36 litres and must be 80%, so the total is 36 ÷ 0.8 = 45 litres. Add 5 litres of water.
4. From 80 litres of milk, 8 litres are drawn and replaced with water, twice. Find the milk left.
Use 80 × 0.9² = 80 × 0.81. The milk left is 64.8 litres.
5. How much 70% acid must be added to 60 litres of 30% acid to make it 40%?
The ratio of weak to strong is (70 − 40) : (40 − 30) = 3 : 1. Add 20 litres.
6. Tea at ₹180 and ₹240 a kg is mixed and sold at ₹264 a kg for a 20% profit. Find the ratio.
The mean cost is 264 ÷ 1.2 = ₹220, so the ratio is 20 : 40. The ratio is 1 : 2.
7. In what ratio must water be mixed with milk at ₹60 a litre to get a mixture worth ₹50 a litre?
Water costs ₹0, so water : milk = (60 − 50) : (50 − 0) = 10 : 50. The ratio is 1 : 5.
8. Two alloys have gold and copper in the ratios 3 : 2 and 7 : 3. Equal weights are melted together. Find the new ratio.
Gold makes up 60% and 70% of the two, so it is 65% of the mix. The ratio is 13 : 7.
9. A class averages 50 marks; boys average 52 and girls 47. Find the ratio of boys to girls.
Use (50 − 47) : (52 − 50). The ratio is 3 : 2.
10. A milkman mixes water with milk and sells the mixture at the cost price of milk, gaining 25%. Find the ratio of milk to water.
He sells 125 litres for every 100 litres of milk he buys. The ratio is 4 : 1.
11. A 50-litre mixture has milk and water in the ratio 3 : 2. How much water must be added to make it 3 : 4?
Milk stays 30 litres, so water must become 40 litres from 20. Add 20 litres.
12. ₹10,000 is lent partly at 6% and partly at 10%, earning ₹840 in a year. Find the two parts.
The average rate is 8.4%, so the ratio is 1.6 : 2.4 = 2 : 3. The parts are ₹4,000 at 6% and ₹6,000 at 10%.
Quick revision
- The price or strength of a mixture is the weighted average of its parts.
- To reach a mean m from values c and d, mix them in the ratio (d − m) : (m − c).
- The rule comes from balance: the gain on the cheaper part equals the loss on the dearer part.
- When water is added, the other ingredient stays fixed, so work with it.
- After n replacements of x units in V units, the pure part left is V × (1 − x ÷ V)ⁿ.
- Water can be treated as an ingredient that costs ₹0.
- Alligation solves any two-part average: groups, rates, speeds over equal times and prices.