UPSC CSE course‹› 0:00 studied

UPSC CSE · Module 49 · Mains depth · 15 min

MSMEs, Make in India and PLI

What UPSC CSE asks from this chapter

Syllabus lines this chapter covers:

  • Prelims Paper I: General Studies · Economic and Social Development-Sustainable Development, Poverty, Inclusion, Demographics, Social Sector Initiatives, etc.
  • Mains Paper IV: General Studies III (Technology, economy, environment, security, disasters) · Effects of liberalization on the economy, changes in industrial policy and their effects on industrial growth.
  • Mains Paper IV: General Studies III (Technology, economy, environment, security, disasters) · Infrastructure: Energy, Ports, Roads, Airports, Railways etc.
  • Mains Paper IV: General Studies III (Technology, economy, environment, security, disasters) · Investment models.

UPSC CSE questions from this module are being sorted into our bank.

Read at full depth: basics, the standard layer and the Mains analysis.

Start from zero: the workshop down the street

Think of the small workshop in your town that makes steel almirahs. It has five workers, a welding machine and a shop at the front. Now think of a mid-sized factory nearby that makes plastic chairs for the whole district.

Both are MSMEs: micro, small and medium enterprises. They are not famous like big companies, but together they are a huge part of India's economy and its jobs.

This chapter covers three linked ideas. First, what MSMEs are and why they matter. Second, Make in India, the drive to make India a manufacturing hub. Third, the PLI scheme, which pays firms for producing more in India.

MSMEs: definition and importance

The definition. Since 1 April 2025, an enterprise is classified by two tests together: investment in plant, machinery or equipment, and annual turnover.

MSME size ladder (from 1 April 2025)
Category Investment up to Turnover up to
Micro ₹2.5 crore ₹10 crore
Small ₹25 crore ₹100 crore
Medium ₹125 crore ₹500 crore

The Budget 2025-26 raised the investment limits about 2.5 times and the turnover limits 2 times. For example, the micro limits were earlier ₹1 crore investment and ₹5 crore turnover.

Why MSMEs matter. Official figures (June 2026) show that MSMEs contribute about 31.1% of GDP, 35.4% of manufacturing output and 48.58% of exports (January 2026 data). They employ more than 38.9 crore people, making them the second-largest source of jobs after agriculture. Udyam registrations crossed 8.7 crore by June 2026.

Why MSMEs matter

Common problems: small firms often struggle to get loans, delayed payments from buyers hurt their cash flow, and many stay small instead of growing.

Make in India

The launch. Make in India was launched on 25 September 2014 at Vigyan Bhawan, New Delhi. Its aim is to make India a global manufacturing hub by attracting investment, building skills and making it easier to do business.

Make in India: then and now

Some results reported by the government (September 2026):

  • Electronics production: from about ₹1.9 lakh crore (2014-15) to about ₹13.11 lakh crore (2025-26).
  • Mobile phones: from about ₹18,000 crore to about ₹6.27 lakh crore; India is the world's second-largest mobile phone maker by volume.
  • Crude steel: from 81.7 to 170.0 million tonnes.
  • Defence production: from ₹46,429 crore to a record ₹1.78 lakh crore in 2025-26.
  • FDI: cumulative US$ 843 billion during 2014-15 to 2025-26.

Why this matters: manufacturing can absorb workers moving out of farming (see Employment and unemployment: concepts and PLFS data) and can raise exports. But success depends on low-cost logistics, reliable power, skilled workers and steady policy.

The Production Linked Incentive (PLI) scheme

The idea. Under PLI, the government pays a firm an incentive linked to extra production or sales made in India. A firm that produces more gets more support. This differs from an old-style subsidy given just for setting up a unit.

How PLI pays

The scale. PLI was launched in 2020. It covers 14 sectors with a total outlay of ₹1.91 lakh crore.

The 14 sectors: large-scale electronics, IT hardware, bulk drugs, medical devices, pharmaceuticals, telecom and networking products, food products, drones, white goods, automobiles and auto components, advanced chemistry cell (ACC) batteries, textile products, specialty steel and high-efficiency solar PV modules.

The 14 PLI sectors

Results so far:

  • By 31 December 2025: 836 applications approved, production and sales over ₹20.41 lakh crore, and incentives of ₹28,748 crore disbursed.
  • By 31 March 2026: actual investment over ₹2.40 lakh crore and over 14.15 lakh direct and indirect jobs (government, July 2026).

The cash crunch of small firms

Start with a small supplier. A small workshop makes parts for a large company and delivers them on time. The large company says it will pay in ninety days, sometimes longer. Meanwhile, the workshop must pay its workers, rent and raw material bills every month, so it borrows at high interest or shuts down.

Getting a small firm paid

Why delayed payment hurts. For MSMEs, cash flow matters more than profit on paper. A big buyer can delay payment because a small supplier is afraid to lose the customer. This hidden credit from small firms to big ones is one of the main reasons MSMEs struggle to grow.

Tools against delay. Under the MSMED Act, 2006, states have Micro and Small Enterprise Facilitation Councils that hear complaints about delayed payments. Since 30 October 2017, the SAMADHAAN portal lets small firms file such cases online. The Income Tax Act also allows a buyer to claim a deduction for money owed to MSMEs only when the payment is actually made, which gives buyers a reason to pay quickly.

Turning bills into cash. The TReDS platform lets an MSME sell its unpaid bills, called receivables, to banks and other financiers, who compete to give the best rate. The MSME gets cash quickly, and the financier collects from the big buyer later. Central public sector enterprises and companies with a turnover of ₹500 crore or more must join TReDS.

Credit without collateral. Many small firms have no property to pledge for a loan. Under the Credit Guarantee Scheme for Micro and Small Enterprises, banks can lend up to ₹5 crore without collateral or a third-party guarantee, because a government trust guarantees much of the loan. This shifts part of the risk from the bank to the guarantee fund.

Why it matters. MSMEs employ crores of people, so helping them get paid on time and borrow easily has a large effect on jobs. A good Mains answer goes beyond "credit" and explains delayed payments, receivables financing and guarantees as linked parts of the same problem.

Chips: the new strategic industry

Start with a phone. A smartphone, a car and even a washing machine run on tiny semiconductor chips. During the COVID-19 period, chip shortages stopped car factories across the world, because a few countries make most advanced chips. Countries learnt that chips are as strategic as oil.

The chip value chain

Why chips are hard. A chip fab, the factory that makes chips, costs billions of dollars, needs ultra-pure water and steady power, and depends on a deep chain of suppliers. Few companies in the world can build one. Without strong government support, private investors hesitate to put so much money into a new location.

India's programme. On 15 December 2021, the Cabinet approved a programme for semiconductor and display manufacturing with an outlay of ₹76,000 crore. For fabs, it offers fiscal support of up to 50% of project cost, shared on a pari-passu basis with the investor. A specialised and independent India Semiconductor Mission was set up as the nodal agency to run it.

How it fits the bigger plan. The chip programme builds on PLI schemes for electronics and on India's large design talent. India already designs many chips, but most are made abroad. Bringing fabs, assembly and testing units into India would add the missing manufacturing link.

Why it matters. Chips are linked to economic security, defence and jobs in high-tech manufacturing. But the cost is high, and success depends on water, power, skills and global partners. A good Mains answer weighs the strategic gains against fiscal costs and execution risks.

Why India is pushing manufacturing: the logic behind MSMEs, Make in India and PLI

Why manufacturing? Services drive India's growth, but factories can absorb many workers with modest skills, and they also make the goods India would otherwise import. That is why Make in India (2014) set out to revitalise manufacturing, to skill the working-age population so that factories can employ them, and to cut the burden of compliance on investors.

Three tools, one goal: more manufacturing

Why MSMEs matter. Small firms are where most industrial jobs are. MSMEs contribute about 31.1% of GDP and 48.58% of exports, and employ more than 38.9 crore people. The limits for "micro, small and medium" were raised from 1 April 2025, so that firms can grow without fear of losing support.

Why PLI (2020)? Opening up was not enough to bring large factories to India, because competing countries offer scale and support. The PLI scheme pays an incentive linked to extra production, so the government rewards output rather than handing out money in advance. By March 2026 PLI had drawn ₹2.40 lakh crore of investment.

Implications. Electronics production rose from about ₹1.9 lakh crore (2014-15) to about ₹13.11 lakh crore (2025-26), showing what targeted support can do. The open questions are cost, how much value is added in India rather than assembled, and whether jobs follow the output.

Mains lens: can India become a manufacturing power?

1. The case for. Electronics and mobile phones show what targeted support can do. PLI ties money to output, so the government pays only when production actually rises.

Can India become a manufacturing power?

2. The concerns.

  • Value addition: in some sectors, much of the value may still come from imported parts, so assembly alone adds limited value.
  • Jobs: capital-heavy sectors create fewer jobs per rupee than labour-heavy ones like textiles and food.
  • MSMEs: most jobs are in small firms, which need credit, timely payments and simpler rules more than large incentives.

3. The way ahead. Deepen local supply chains, support labour-intensive sectors, improve logistics (see Infrastructure: roads, railways, ports, airports and Gati Shakti) and help MSMEs grow.

A good conclusion: Make in India and PLI have shown results in some sectors. Lasting success needs a strong base of MSMEs, more local value addition and many more jobs.

Mains practice: three questions, three angles

These are practice questions written by us, not past papers. Past questions from each exam are in the PYQ panel of this module.

Angle Question Key points to cover
Why Why does India need a strong manufacturing sector despite a large services sector? Explain that manufacturing creates jobs for people with modest skills and reduces imports. Then link this to the aims of Make in India and the need for skills.
Evaluate Evaluate the PLI scheme as a tool of industrial policy. Explain that incentives are linked to extra output, across 14 sectors with ₹1.91 lakh crore. Then use the ₹2.40 lakh crore of investment and weigh the debate on how much value is added in India.
MSMEs What are the main challenges of MSMEs in India? Suggest measures. Use their 31.1% share of GDP to show their weight, then explain the shortage of credit. Then discuss formalisation through Udyam and the revised limits of 2025.

How to use this table: each answer should explain the what, then the why from the section above, and end with a way forward.

Quick revision

  • From 1 April 2025, a micro enterprise has investment up to ₹2.5 crore and turnover up to ₹10 crore, a small one up to ₹25 crore and ₹100 crore, and a medium one up to ₹125 crore and ₹500 crore.
  • MSMEs contribute about 31.1% of GDP, 35.4% of manufacturing output and 48.58% of exports, and they provide more than 38.9 crore jobs.
  • By June 2026, more than 8.7 crore MSMEs had registered on the Udyam portal.
  • Make in India was launched on 25 September 2014 to make India a manufacturing hub.
  • Since then, electronics output has grown from ₹1.9 lakh crore to ₹13.11 lakh crore, and mobile phone output from ₹18,000 crore to ₹6.27 lakh crore, making India the second largest mobile maker by volume.
  • The PLI schemes, launched in 2020, cover 14 sectors with an outlay of ₹1.91 lakh crore, and ₹28,748 crore had been paid out by December 2025.
  • By March 2026, they had drawn more than ₹2.40 lakh crore of investment and created more than 14.15 lakh jobs.
  • Delayed payments to MSMEs are tackled by Facilitation Councils (MSMED Act 2006), the SAMADHAAN portal (2017), TReDS receivables discounting (mandatory for CPSEs and firms with turnover ≥ ₹500 crore) and an income-tax rule allowing deduction only on actual payment; credit guarantees cover collateral-free loans up to ₹5 crore.
  • The semiconductor programme (15 Dec 2021, ₹76,000 crore) offers up to 50% of fab cost and is run by the India Semiconductor Mission.

Common confusions and exam traps:

MSMEs, Make in India, PLI: revision card
  • MSME classification uses both investment and turnover.
  • PLI pays on extra production or sales, not on setting up a unit.
  • PLI's outlay figure is ₹1.91 lakh crore; investment attracted (₹2.40 lakh crore) is a different number.

Check yourself

Exam-style questions on this chapter. Pick an answer to see the explanation. 0 of 8 answered

  1. Under the MSME classification effective from 1 April 2025, a micro enterprise has investment and turnover not exceeding:

  2. Under the revised MSME definition, a medium enterprise can have turnover up to:

  3. Consider the following statements based on official data (June 2026): 1. MSMEs contribute about 31.1% of India's GDP. 2. MSMEs account for nearly half of India's exports. 3. MSMEs are the largest source of employment in India, ahead of agriculture. Which of the statements given above is/are correct?

  4. The Make in India initiative was launched on:

  5. The Production Linked Incentive (PLI) scheme gives incentives mainly on the basis of:

  6. Assertion (A): Investment attracted under PLI schemes exceeds the total PLI outlay. Reason (R): The PLI outlay is ₹1.91 lakh crore, while actual investment exceeded ₹2.40 lakh crore by 31 March 2026.

  7. TReDS, mandatory for central public sector enterprises and large companies, is a platform for:

  8. Consider the following statements about India's semiconductor programme approved in December 2021: 1. It had an outlay of ₹76,000 crore. 2. It offers fiscal support of up to 50% of project cost for semiconductor fabs. Which of the statements given above is/are correct?

Mains answer practice

Write your answer first, then open the points a good answer should cover.

  1. Has the PLI scheme helped Make in India achieve its goals? Examine with examples and suggest what more is needed. (250 words)

    Show answer points
    • Make in India 25 Sep 2014; PLI 2020, 14 sectors, ₹1.91 lakh cr
    • Electronics ₹1.9 → ₹13.11 lakh cr; mobiles ₹18,000 cr → ₹6.27 lakh cr
    • PLI investment ₹2.40 lakh cr+, jobs 14.15 lakh+; disbursed ₹28,748 cr
    • Concerns: import content, capital-intensive, few MSMEs
    • MSMEs: 31.1% GDP, 48.58% exports, 38.9 crore jobs
    • Way ahead: local supply chains, labour-intensive sectors, logistics, MSME credit
  2. Delayed payments are as big a problem for MSMEs as lack of credit. Discuss the measures taken and suggest improvements. (150 words)

    Show answer points
    • Explain why delayed payments act as hidden credit from small firms to big buyers.
    • Describe the tools: Facilitation Councils, SAMADHAAN, TReDS, the income-tax deduction rule, credit guarantees up to ₹5 crore.
    • Assess limits: fear of losing customers, slow councils, low TReDS use by some buyers.
    • Suggest improvements: stricter enforcement, wider TReDS mandate, faster dispute resolution, transparency of payment records.

Previous year questions

Previous year questions for UPSC CSE will appear here once each one is checked word for word against the official question paper.

Frequently asked questions

What is the new definition of MSMEs?

From 1 April 2025, micro means investment up to ₹2.5 crore and turnover up to ₹10 crore, small up to ₹25 crore and ₹100 crore, and medium up to ₹125 crore and ₹500 crore.

How much do MSMEs contribute to the economy?

As per PIB (June 2026), MSMEs contribute about 31.1% of GDP, 35.4% of manufacturing output and 48.58% of exports, and employ more than 38.9 crore people.

What is the PLI scheme?

The Production Linked Incentive scheme, launched in 2020, covers 14 sectors with an outlay of ₹1.91 lakh crore and pays incentives linked to additional sales of goods made in India.

When was Make in India launched?

Make in India was launched on 25 September 2014 to revive manufacturing, build skills and attract investment.