Module 1 · 7 min read · Free chapter
Matter: states, mixtures and separation
Matter has mass and takes up space, and its common states are solid, liquid and gas, with plasma in stars and lightning. Camphor and dry ice sublime, turning straight from solid to gas. Mixtures are separated by filtration, distillation, chromatography, centrifugation and other methods. Steam burns more than boiling water because it carries extra latent heat.
Start from zero: what is matter?
The glass in your hand, the water in it and the air you breathe all have something in common. Each of them has mass, and each takes up space. Anything that does both is called matter, and chemistry is the study of matter and how it changes.
Light, sound and heat are not matter, because they have no mass and take up no space. Feelings and ideas are not matter either.
This chapter is the foundation for all of chemistry. It covers the states of matter, how they change, the difference between pure substances and mixtures, and the methods used to separate mixtures.
Solid, liquid and gas
All matter is made of tiny particles, and how tightly they are packed decides the state. In a solid, particles are packed close and only vibrate in place, so a solid has a fixed shape and fixed volume.
In a liquid, particles are close but can slide past each other. So a liquid has a fixed volume but takes the shape of its container. In a gas, particles are far apart and move fast in all directions, so a gas has neither fixed shape nor fixed volume and can be compressed easily.
Beyond these three, plasma is a fourth state in which atoms are so hot that they lose electrons. It is found in the Sun and other stars, in lightning and in neon signs. A fifth state, the Bose-Einstein condensate, forms only when atoms are cooled to almost absolute zero.
Changing from one state to another
Heat or cool matter and it can change its state. Each change has a name, and exams ask them often.
| Change | Name | Example |
|---|---|---|
| Solid to liquid | Melting | Ice to water |
| Liquid to gas | Boiling or evaporation | Water to steam |
| Gas to liquid | Condensation | Dew on grass |
| Liquid to solid | Freezing | Water to ice |
| Solid directly to gas | Sublimation | Camphor, naphthalene balls, dry ice |
Evaporation is different from boiling. It happens at any temperature, only from the surface, and it cools what is left behind. That is why sweat cools the skin and water in an earthen pot stays cool. It is faster on hot, dry, windy days and when the surface is wide.
During a change of state, heat goes in or out without changing the temperature. This hidden heat is called latent heat. Steam at 100°C carries extra latent heat, so a steam burn is worse than a burn from boiling water at the same temperature.
Boiling, freezing and pressure
At normal air pressure, pure water boils at 100°C and ice melts at 0°C. But these numbers change with pressure and with what is dissolved in the water.
On high mountains, air pressure is lower, so water boils below 100°C. Food then cooks slowly, because the water never gets hot enough. A pressure cooker does the opposite. It traps steam, raises the pressure, and lets water boil above 100°C, so food cooks faster.
Dissolving salt in water lowers its freezing point. This is why salt is spread on icy roads in cold countries, and why a mix of ice and salt is used to make kulfi and ice cream colder than plain ice.
Elements, compounds and mixtures
Matter can be pure or a mixture. A pure substance is either an element or a compound.
An element is made of only one kind of atom and cannot be broken into anything simpler by chemical means. Iron, gold, oxygen and carbon are elements. A compound forms when two or more elements join chemically in a fixed ratio. Water is always hydrogen and oxygen in the ratio 2:1, and its properties are completely different from both gases.
A mixture is made when substances are simply mixed in any ratio, without joining chemically, and each keeps its own properties. If the mixture looks the same throughout, like salt solution, air or brass, it is homogeneous. If you can see the different parts, like sand in water or oil on water, it is heterogeneous.
Separating mixtures
Because the parts of a mixture keep their own properties, we can use those differences to separate them. The method depends on what is mixed with what.
| Method | Used to separate |
|---|---|
| Filtration | Insoluble solid from a liquid, like sand from water |
| Evaporation | Dissolved salt from sea water |
| Distillation | Pure water from salty water; liquids with different boiling points |
| Fractional distillation | Petrol, diesel and kerosene from crude oil; gases from liquid air |
| Sublimation | Ammonium chloride or camphor from common salt |
| Centrifugation | Cream from milk; blood cells from plasma |
| Chromatography | Different colours in ink or dyes |
| Separating funnel | Two liquids that do not mix, like oil and water |
| Magnet | Iron filings from sand |
| Crystallisation | Pure crystals of copper sulphate or sugar |
Many of these happen in daily life. Churning curd separates butter, and a tea strainer is a simple filter.
Physical and chemical changes
Not every change makes something new. In a physical change, the substance stays the same, only its shape, size or state changes. Melting ice, dissolving sugar, tearing paper and stretching a rubber band are physical changes, and most of them can be reversed.
In a chemical change, a new substance with new properties forms. Burning wood, rusting of iron, cooking food, digesting food and the curdling of milk are chemical changes. They usually cannot be reversed easily.
Signs of a chemical change include a change of colour, a new smell, gas bubbles, light or heat being given out, or a solid forming. Chemical changes are the subject of the chapter on reactions.
Mains lens: separation science in industry and daily life
Separating mixtures is not just a lab exercise, because whole industries depend on it. The questions in this section are practice questions written by us, not past papers.
Angle 1: fuels. Refineries use fractional distillation to split crude oil into LPG, petrol, kerosene, diesel and bitumen. India imports most of its crude oil, so refining capacity is a strategic asset.
Angle 2: water. Drinking water plants use settling, filtration and disinfection, while coastal plants can make fresh water from sea water. Cheap, low-energy methods matter for water-short regions.
Angle 3: salt and gases. Sea salt is made by evaporation in salt pans, and oxygen for hospitals is separated from liquid air.
Practice questions:
- Explain with examples how the properties of components decide the method of separating a mixture. (150 words)
- Discuss the role of separation techniques in India's energy and water security. (250 words)
Answer plan for the second question: Start with fractional distillation of crude oil and why refining matters for an importing country. Then cover water purification and desalination. End with energy costs, waste brine and the need for cleaner methods.
Quick revision
- Matter has mass and takes up space. Its common states are solid, liquid and gas, and plasma is the fourth.
- Sublimation turns a solid straight into gas, as in camphor, naphthalene and dry ice.
- Water boils at 100°C at normal pressure, below that in the hills, and above that in a pressure cooker.
- An element has one kind of atom, and a compound has elements in a fixed ratio. A mixture has any ratio.
- Air and brass are homogeneous mixtures.
- Cream is separated by centrifugation, ink colours by chromatography, and crude oil by fractional distillation.
| Remember this | Answer |
|---|---|
| Fourth state of matter | Plasma |
| Camphor turning to vapour | Sublimation |
| Cream from milk | Centrifugation |
| Petrol from crude oil | Fractional distillation |
| Oil and water | Separating funnel |