RSSB Rajasthan CET (Graduate) course‹› 0:00 studied

RSSB Rajasthan CET (Graduate) · Module 28 · basic depth · 19 min

Inflation: meaning, causes and types

What RSSB Rajasthan CET (Graduate) asks from this chapter

Syllabus lines this chapter covers:

  • CET Graduation Level (one paper) · Economy of India.

RSSB Rajasthan CET (Graduate) questions from this module are being sorted into our bank.

Cut to basic depth for RSSB Rajasthan CET (Graduate). 50 deeper paragraphs are in the full chapter.

Start from zero: why does the same note buy less?

Ask your grandmother what a samosa cost when she was young. She may say a few paise. Your parents remember it at one or two rupees. Today, near most schools, it costs ₹10 to ₹20.

The same ₹100 note, buying less each year

The samosa has not become bigger or tastier. The potato, the oil and the flour are much the same. So what changed?

What changed is the value of money. A rupee note is only a piece of paper that people agree to accept.

What matters is how much it can buy. When prices of most things go up over time, the same note buys less. Economists call this the purchasing power of money, and when it keeps falling, we say there is inflation.

Think of a family budget. Suppose a family in Patna spent ₹10,000 a month last year on food, rent, school fees, bus fares and electricity. This year, for exactly the same things, the same family has to spend ₹10,500. Nothing extra was bought.

Only the prices rose. The family has to spend ₹500 more just to stand still. If the father's salary did not rise, the family is actually poorer, even though the salary figure on the slip is the same.

That is the heart of this chapter. Inflation is not about one thing becoming costly. It is about the whole basket of things that ordinary people buy becoming costlier, month after month. In this chapter we answer four simple questions:

  • What exactly is inflation, and how is it different from one price going up?
  • How does India keep score of prices?
  • Why do prices rise? (the causes)
  • What kinds of inflation are there, and how does the government try to keep it in check?

The basic tools are simple. If you understand a family's shopping bag, you can understand India's inflation.

What inflation is, and what it is not

Definition in plain words: inflation is a sustained rise in the general price level of goods and services in an economy over a period of time. Three words in this definition do all the work.

Inflation, disinflation and deflation
  1. General. If only tomatoes become costly after heavy rain, that is a change in one relative price, not inflation. Inflation means the average of many prices, the whole basket, is going up. Some items may even become cheaper in the same month (mobile data has become much cheaper over the years), yet the overall level can still rise.
  2. Sustained. A one-time jump, such as a festival-week spike in flower prices, which falls back next week, is not inflation. Inflation is a rise that continues month after month.
  3. Price level. Economists measure the price level with an index number. Pick a base year and call the cost of the basket in that year 100. If the same basket costs 106 next year, the index is 106, and the rate of inflation is the percentage change:

Inflation rate = (Index this year − Index last year) ÷ Index last year × 100 = (106 − 100) ÷ 100 × 100 = 6%

In India the official monthly figure compares an index with the same month of the previous year. So "inflation in March was 5%" means prices in March this year were, on average, 5% higher than in March last year. This is called year-on-year inflation.

Three cousins of inflation that students often confuse:

  • Deflation: the general price level actually falls (the rate is negative). This sounds pleasant, but if people expect prices to fall further, they postpone buying, factories sell less, and jobs can be lost.
  • Disinflation: inflation is still positive but slowing down. If inflation goes from 7% to 5%, prices are still rising, only more slowly. Prices have not fallen.
  • Reflation: a deliberate push by the government or central bank to lift prices and demand back up after a slump or deflation.

Remember: when a newspaper says "inflation fell", it nearly always means disinflation. Your vegetable bill is still higher than last year, only the speed of increase has slowed.

How India keeps score: CPI and WPI

A family can check its own bills. A country of crores of people needs an official basket and an official scorekeeper. India has two main price indices. Here is the short version; the full method is in the next chapter (see Measuring inflation: CPI, WPI, PPI and the GDP deflator).

What goes into the CPI basket

1. Consumer Price Index (CPI): the shopping-bag index. CPI tracks the retail prices that households pay: rice, milk, vegetables, clothes, rent, school fees, doctor's fees, bus fares, mobile recharges.

  • It is released by the Ministry of Statistics and Programme Implementation (MoSPI).
  • Its base year was revised from 2012=100 to 2024=100. The first release on the new base came on 12 February 2026, for January 2026.
  • It is published separately for rural, urban and combined (all-India) sectors. The combined index is a weighted average of the two.
  • The weights (how much each item counts) come from what families actually spend, measured by the Household Consumption Expenditure Survey (HCES) 2023-24.
  • The new series has 358 items in 12 divisions (an international classification called COICOP 2018). It even collects prices from online markets in 12 large towns and includes services such as OTT streaming, because that is now part of how Indians spend.

Why weights matter, with one number to remember. In the combined CPI, the weight of food and beverages fell from 45.86% in the 2012 series to 40.10% in the 2024 series. This tells a happy story: as families grow richer, a smaller share of their spending goes on food and a bigger share on services, transport and education. It also means a jump in vegetable prices now moves the overall CPI a little less than it used to, though food is still the single biggest block.

2. Wholesale Price Index (WPI): the factory-gate and mandi index. WPI tracks prices at the wholesale stage, in bulk trade between businesses.

  • It is compiled by the Office of the Economic Adviser, DPIIT, Ministry of Commerce and Industry.
  • The new series has base year 2022-23 (the earlier one was 2011-12).
  • It covers goods only, not services. Its three major groups and weights are Primary articles 22.76, Fuel and power 14.11 and Manufactured products 63.13.
  • The government is also building a Producer Price Index (PPI), which covers services too.

Which one matters more? For ordinary people and for the RBI, CPI matters more, because it is what families actually pay. India's official inflation target, which we meet in a later section, is set on CPI.

Cause 1: demand-pull, too much money chasing too few goods

The mela example. At a village mela, a stall has 10 balloons. On a normal day 10 children come with ₹10 each, and every balloon sells for ₹10. Now suppose it is Diwali, and 30 children arrive, each with extra pocket money from relatives.

Demand-pull: too much money chasing too few goods

There are still only 10 balloons. The stall owner quickly realises he can ask ₹15, then ₹20, and still sell all of them. Nothing about the balloon changed. Demand rose faster than supply, so the price was pulled up.

This is demand-pull inflation: when total spending in the economy (the demand of households, businesses and the government together) grows faster than the economy's ability to produce goods and services, prices rise. The classic one-line description is "too much money chasing too few goods".

Where does the extra demand come from?

  • Rising incomes and easy credit. When loans become cheap, people buy more cars, houses and appliances on EMI, and businesses borrow to expand. If factories cannot produce faster, prices rise.
  • Government spending. When the government spends much more than it collects in taxes (a large fiscal deficit), it puts extra money into people's hands. If this is spent on things that do not quickly add to supply, it adds to demand.
  • More money in the system. If the amount of money in the economy grows much faster than output, each rupee ends up chasing fewer goods.
  • Exports and remittances. Money coming in from abroad also adds to spending at home.

A useful picture is the economy's speed limit. Every economy has a level of output it can produce without straining its factories, roads and workers.

Economists call this potential output. When demand pushes the economy beyond that speed limit, the engine overheats, and the "heat" shows up as rising prices. This is why central banks speak of an economy "overheating".

Why this matters: demand-pull inflation responds well to monetary policy. When the RBI raises interest rates, loans become costlier, people borrow and spend a little less, and the pull on prices eases. We study these tools in the chapter on the RBI and monetary policy.

Cause 2: cost-push, when making things gets costlier

The chai-stall example. Ramesh runs a tea stall. His cup of tea needs milk, sugar, tea leaves and gas.

Cost-push: one cost rises, prices follow down the chain

Suppose the price of milk goes up by a quarter and the gas cylinder becomes costlier. His customers are the same, and they want the same number of cups. But each cup now costs more to make. If he keeps the old price, he makes a loss.

So he raises the price from ₹10 to ₹12. Here prices were not pulled up by extra demand. They were pushed up by higher costs.

This is cost-push inflation: prices rise because the cost of producing goods and services rises, and producers pass it on to buyers.

The usual sources of cost-push in India:

  • Fuel. Diesel runs the trucks that bring vegetables to the mandi, the pumps that irrigate fields and the generators in small factories. When crude oil becomes costlier in the world market, the cost of almost everything rises, because almost everything is transported. This is why fuel is called a universal intermediate input.
  • Supply shocks in farming. A weak monsoon, a flood or a heat wave can destroy a crop. Onion, tomato and pulse prices are famous for sudden jumps after bad weather. Because food and beverages still carry about 40% of the weight in the combined CPI, food shocks move India's headline inflation a lot more than they would in a rich country.
  • Wages. If wages rise faster than workers' productivity, the labour cost per unit of output rises.
  • Imported inputs and the rupee. India imports crude oil, edible oil, fertiliser and electronic parts. If the rupee weakens against the dollar, these imports cost more in rupees, even if their dollar price is unchanged. This is called imported inflation.
  • Taxes and administered prices. Higher indirect taxes on fuel or goods, or a rise in prices that the government sets (such as some fuel or fertiliser prices), also push costs up.

Why this matters: cost-push inflation is harder to cure with interest rates alone. Raising interest rates does not make it rain, and it does not bring down the world price of crude oil.

It can only cool demand, which may slow growth further. So cost-push inflation needs supply-side tools too: better storage and cold chains, imports to fill a shortage, buffer stocks, cutting fuel taxes, and faster transport. A good Mains answer always separates demand-side and supply-side remedies.

India's answer: an inflation target set by law

The school-exam example. Imagine a school that tells its students, "Score anything you like." Some will work hard, many will not. Now imagine the school says, "The pass mark is 40, and the class teacher must explain in writing to the principal if the class average falls below it three tests in a row." Suddenly everyone knows the goal, and someone is accountable. India did something similar for inflation.

India's inflation target and tolerance band

The law. The RBI Act, 1934 was amended by the Finance Act, 2016 to give a statutory basis to a framework called flexible inflation targeting. Under Section 45ZA, the Central Government, in consultation with the RBI, sets the inflation target in terms of the Consumer Price Index, once every five years.

The target, period by period:

  • 5 August 2016: the first target was notified: 4% CPI headline inflation, with a tolerance band of 2% to 6%, for the period up to 31 March 2021.
  • March 2021: the same target was retained for five more years, up to 31 March 2026.
  • 25 March 2026 (Gazette notification S.O. 1580(E)): the government again retained 4%, with an upper tolerance level of 6% and a lower tolerance level of 2%, for 1 April 2026 to 31 March 2031.

Why a band and not a single number? Because shocks such as a bad monsoon or an oil price jump can push inflation around for reasons outside the RBI's control. The band (4% plus or minus 2) gives room for such shocks, while the 4% midpoint stays the real goal. That is why it is called flexible targeting: the RBI also keeps an eye on growth.

When is the target "missed"? If average inflation stays above 6% or below 2% for any three consecutive quarters. Notice that a low reading is a failure too. Inflation that is too low can mean weak demand and lost jobs.

Who decides the interest rate to hit the target? The Monetary Policy Committee (MPC). It has six members:

  • three from the RBI, including the Governor, and
  • three appointed by the Central Government on the recommendation of a Search-cum-Selection Committee, for four years, and they cannot be re-appointed.

The MPC decides the policy repo rate, the main interest rate of the economy. How the repo rate travels to your loan EMI is the story of the chapter on the RBI and monetary policy.

Why this matters: before this framework, the RBI had many goals at once, and nobody could say clearly whether it had succeeded. A written target makes the goal clear, makes the RBI accountable, and, most importantly, helps anchor expectations: if people believe inflation will stay near 4%, they behave in ways that keep it there.

Quick revision

  • Inflation is a sustained rise in the general price level, so each rupee buys less than before.
  • Deflation means prices actually fall, while disinflation means inflation slows down but stays above zero.
  • The CPI is compiled by MoSPI for rural, urban and combined India, and its base moved from 2012=100 to 2024=100, with the first new-base release on 12 February 2026.
  • In the new CPI, food and beverages carry a weight of 40.10%, down from 45.86%, because families now spend a smaller share of their budget on food.
  • The WPI is compiled by the Office of the Economic Adviser in DPIIT on base 2022-23, and it covers goods only, so a new Producer Price Index (PPI) adds services.
  • Inflation can come from demand-pull (too much money chasing too few goods) or from cost-push (dearer fuel, a weak monsoon, higher wages or a falling rupee).
  • Once it starts, it can feed on itself through expectations and a wage-price spiral, and structural bottlenecks in supply keep it high.
  • By speed, inflation is called creeping, walking, galloping or hyper, and stagflation is the bad mix of slow growth with high inflation.
  • Under Section 45ZA of the RBI Act, the Centre sets the target every five years in consultation with the RBI, and it is now 4% CPI with a band of 2–6%.
  • On 25 March 2026, that target was retained for 1 April 2026 to 31 March 2031.
  • The RBI is held to have failed if average inflation stays above 6% or below 2% for three consecutive quarters.
  • The Monetary Policy Committee has six members: three from the RBI, including the Governor, and three appointed by the Centre for four years without re-appointment.

Common confusions and exam traps:

One-page revision card
  • The target is set by the Central Government, in consultation with the RBI, not by the RBI alone.
  • The target is on CPI headline, not WPI and not core.
  • Falling below 2% for three quarters is also a failure.
  • "Inflation fell" usually means disinflation, not falling prices.
  • CPI is from MoSPI; WPI is from DPIIT (Commerce and Industry). Do not swap them.
  • The new CPI base is 2024; the new WPI base is 2022-23.

Check yourself

Exam-style questions on this chapter. Pick an answer to see the explanation. 0 of 13 answered

  1. Consider the following statements about India's inflation target: 1. It is determined by the RBI on its own. 2. It is set in terms of the Consumer Price Index. 3. It is determined once every five years. Which of the statements given above is/are correct?

  2. For the period 1 April 2026 to 31 March 2031, India's CPI inflation target and tolerance band are:

  3. Under the flexible inflation targeting framework, the target is considered missed when average inflation is:

  4. Consider the following statements about the Monetary Policy Committee (MPC): 1. It has six members. 2. Three members are from the RBI, including the Governor. 3. Members appointed by the Central Government can be re-appointed for a second term. Which of the statements given above are correct?

  5. The base year of India's Consumer Price Index in the new series released from February 2026 is:

  6. Match the index with the body that compiles it: A. Consumer Price Index B. Wholesale Price Index 1. Office of the Economic Adviser, DPIIT 2. MoSPI

  7. Which one of the following is NOT covered by the Wholesale Price Index?

  8. In the combined CPI (2024=100), the weight of the 'food and beverages' group is about:

  9. If inflation falls from 7% to 5%, the situation is best described as:

  10. Assertion (A): Raising interest rates is less effective against inflation caused by a failed monsoon. Reason (R): Higher interest rates cool demand but do not increase the supply of farm produce.

  11. The 'multiple indicator approach' to monetary policy, adopted by the RBI in April 1998, replaced which earlier framework?

  12. Consider the following statements about the Expert Committee to Revise and Strengthen the Monetary Policy Framework: 1. It was chaired by Urjit Patel. 2. It recommended inflation as the nominal anchor. 3. It recommended a glide path of 8% by January 2015 and 6% by January 2016. Which of the statements given above is/are correct?

  13. The Monetary Policy Framework Agreement between the Government of India and the RBI was signed in:

Mains answer practice

Write your answer first, then open the points a good answer should cover.

  1. "Inflation in India is as much a supply-side problem as a monetary one." Critically examine. (250 words)

    Show answer points
    • Framework: inflation = sustained rise in general price level; 4% CPI target, 2–6% band, Section 45ZA, retained to 31 Mar 2031
    • Monetary/demand side: credit growth, fiscal deficit, liquidity; MPC and repo rate; anchoring expectations
    • Supply side: food shocks (food and beverages ~40% of CPI), fuel, imported inflation, storage gaps, structural bottlenecks
    • Why both: rates cannot cure a monsoon shock, but food inflation feeds expectations and wages
    • Way forward: policy coordination, cold chains, buffer stocks, market reform, look-through of short supply shocks
  2. Why did India adopt flexible inflation targeting in 2016, and how far has it achieved its aims? (250 words)

    Show answer points
    • Before: monetary targeting (1985-98) and multiple indicator approach (1998-2015) with no clear nominal anchor
    • Trigger: average CPI inflation 8.1% in 2006-16, above world average
    • Path: Patel Committee (Jan 2014), MPFA (Feb 2015), RBI Act amendment (May 2016), MPC (Sep 2016)
    • Results: average 4.6% in 2016-26, range 0.3-7.8%, anchored expectations, growth 7.0% vs 6.8% (ex-COVID)
    • Limits: breaches in 2020-21 and 2022-23; food and supply shocks need government action
    • Way forward: keep 4% ± 2%, look through short supply shocks, fiscal-monetary coordination

Previous year questions

Previous year questions for UPSC CSE will appear here once each one is checked word for word against the official question paper.

Frequently asked questions

What is inflation in simple words?

Inflation is a sustained rise in the general price level of goods and services, which means each rupee buys less than before.

What is the difference between demand-pull and cost-push inflation?

Demand-pull inflation happens when total demand runs ahead of supply. Cost-push inflation happens when the cost of inputs such as fuel, wages or raw materials rises and producers pass it on.

What is India's inflation target?

The target is 4% CPI headline inflation with a tolerance band of 2% to 6%. It was first notified on 5 August 2016 and has been retained up to 31 March 2031.

Who sets the inflation target in India?

Under Section 45ZA of the RBI Act, 1934, the Central Government sets the target in consultation with the RBI, in terms of CPI, once every five years.