TNPSC Group 4 · Module 52 · basic depth · 5 min
Mixtures and alligation
What TNPSC Group 4 asks from this chapter
Syllabus lines this chapter covers:
- Part C: Aptitude and mental ability · Aptitude: simplification, percentage, HCF/LCM, ratio and proportion, interest, area and volume, time and work.
TNPSC Group 4 questions from this module are being sorted into our bank.
Cut to basic depth for TNPSC Group 4. 56 deeper paragraphs are in the full chapter.
Start from zero: a tea stall's blend
A tea stall owner buys two kinds of tea leaves, one at ₹180 a kilogram and a better one at ₹240. He mixes 2 kg of the cheaper tea with 1 kg of the better tea. The 3 kg blend cost him 2 × 180 + 1 × 240 = ₹600, so it is worth ₹200 a kilogram.
Notice that ₹200 is not the simple average of 180 and 240, which is 210. There is more of the cheaper tea, so the blend's price leans towards ₹180. The price of a mixture is a weighted average, the same idea you met with combined averages.
Why mixtures matter. Farmers blend seed varieties, ration shops mix grain lots, pharmacists dilute medicines and engineers mix concrete in fixed proportions. In each case someone must know what the final price or strength will be, or how much of each part to use to hit a target.
This chapter teaches a quick method called alligation for the second question, "in what ratio should I mix?". It also covers adding water and repeated replacement, which appear often in exams.
Adding water and changing strength
The fixed ingredient. A 40-litre can of milk contains 10% water, so it has 36 litres of milk. How much water must be added to make the water 20%? The milk does not change when water is added, and that is the key.
Solving it. After adding water, milk must be 80% of the new total. So 36 = 0.8 × total, which gives a total of 45 litres. The water to add is 45 − 40 = 5 litres.
Why focus on the fixed part. Both the total and the water change, so working with them leads to two unknowns. The milk is the one quantity that stays the same, so it carries the information from the old mixture to the new one.
Changing a ratio. A 50-litre mixture has milk and water in the ratio 3 : 2, so it has 30 litres of milk and 20 litres of water. To make the ratio 3 : 4, the water must become 40 litres while the milk stays 30. So 20 litres of water must be added.
Mixing two solutions. To raise 60 litres of 30% acid to 40% by adding 70% acid, use alligation on the strengths. The ratio of weak to strong is (70 − 40) : (40 − 30) = 3 : 1, so 60 litres of the weak solution need 20 litres of the strong one.
Why it matters. Dilution questions test whether you can spot the quantity that does not change. The same skill solves many reasoning and science questions.
Quick revision
- The price or strength of a mixture is the weighted average of its parts.
- To reach a mean m from values c and d, mix them in the ratio (d − m) : (m − c).
- The rule comes from balance: the gain on the cheaper part equals the loss on the dearer part.
- When water is added, the other ingredient stays fixed, so work with it.
- After n replacements of x units in V units, the pure part left is V × (1 − x ÷ V)ⁿ.
- Water can be treated as an ingredient that costs ₹0.
- Alligation solves any two-part average: groups, rates, speeds over equal times and prices.